Kee Cover
Kee Cover® Skylight Screens are designed to prevent individuals from falling through fragile roof lights. These screens offer a practical solution for covering roof lights that are left unprotected while still allowing natural light to enter the building. The Kee Cover has been specifically crafted to ensure that light is not blocked while also providing effective protection.
Call us at +64 (0)4 213 89 60 or e-mail at contact@selectfit.co.nz to order Kee Cover.
Browse Products
→ Tubing – 5210
→ Single Socket Tee – 10-5
→ Two Socket Cross – 26-5
→ Rail Support – 70-5
→ Standard Railing Flange – 62-5
→ Single Sided Clip – 81-5
→ Mesh Panel – WMP8023/ WMP4023
→ Identification Paque – KCIDPLA01
→ Plastic Plug – 77-5
→ Self Drilling Screw – SDS55X55G
→ Sealing Strip – TA-SEAL
→ Standing Seam Clamps – KCFP1
Kee Cover Components
2000mm TUBING – 5210
Standard lengths supplied O/D 26.9mm : Wall thickness 3.2mm.
Material:Galvanised steel to BS EN ISO 1461.
Net weight: 3kg.
3000mm TUBING – 5210
Standard lengths supplied O/D 26.9mm : Wall thickness 3.2mm.
Material:Galvanised steel to BS EN ISO 1461.
Net weight: 4.69kg.
902mm TUBING – 5210
Standard lengths supplied O/D 26.9mm : Wall thickness 3.2mm.
Material:Galvanised steel to BS EN ISO 1461.
Net weight: 1.41kg.
500mm TUBING – 5210
Standard lengths supplied O/D 26.9mm : Wall thickness 3.2mm.
Material:Galvanised steel to BS EN ISO 1461.
Net weight: 0.78kg.
925mm TUBING – 5210
Standard lengths supplied O/D 26.9mm : Wall thickness 3.2mm.
Material:Galvanised steel to BS EN ISO 1461.
Net weight: 1.45kg.
1925mm TUBING – 5210
Standard lengths supplied O/D 26.9mm : Wall thickness 3.2mm.
Material:Galvanised steel to BS EN ISO 1461.
Net weight: 3kg.
200mm TUBING – 5210
Standard lengths supplied O/D 26.9mm : Wall thickness 3.2mm.
Material:Galvanised steel to BS EN ISO 1461.
Net weight: 0.32kg.
SINGLE SOCKET TEE – 10-5
This fitting connects the horizontal tubing to the vertical tubing at each corner.
Material: Malleable cast iron to BS 1562 and galvanised to BS EN ISO 1461.
Net weight: 0.23kg.
TWO SOCKET CROSS – 26-5
This fitting is used to connect the horizontal tubing to the vertical tubing in the centre of a raised panel, or to connect to an extension panel.
Material: Malleable cast iron to BS 1562 and galvanised to BS EN ISO 1461.
Net weight: 0.27kg.
RAIL SUPPORT – 70-5
This fitting acts as feet to connect horizontal rails to the roof structure.
Material: Malleable cast iron to BS 1562 and galvanised to BS EN ISO 1461.
Net weight: 0.36kg.
STANDARD RAILING FLANGE – 62-5
This fitting acts as feet to connect raised panels to the roof structure.
Material: Malleable cast iron to BS 1562 and galvanised to BS EN ISO 1461.
Net weight: 0.59 kg.
SINGLE SIDED CLIP – 81-5
This component is used to attach the wire mesh to the Primary Tubing. All clips are supplied with an M6 x 35mm nut and bolt.
Material: Gralanised steel to BS EN ISO 1461.
Net weight: 0.07kg.
MESH PANEL – WMP8023
This component lays on top of the Tube Frame and is attached on all sides to the tubing via the Single Sided Clips. 1000 x 2000mm Mesh panel, 50mm x 50mm x 3.2mm.
Material: Galvanised steel to BS EN ISO 1461.
Net weight: 6kg.
MESH PANEL – WMP4023
This component lays on top of the Tube Frame and is attached on all sides to the tubing via the Single Sided Clips. 1000 x 1000mm Mesh panel, 50mm x 50mm x 3.2mm.
Material: Galvanised steel to BS EN ISO 1461.
Net weight: 3kg.
IDENTIFICATION PLAQUE – KCIDPLA01
To identify product during inspection with holes to allow. 17mm x 10mm. Thickness 3mm.
Material: PVC Foamex Board.
Net weight: 0.03kg.
PLASTIC PLUG – 77-5
This component is fitted to the top of the Horizontal Standard Tubing.
Material: PVC.
Net weight: 0.009kg.
SELF DRILLING SCREW – SDS55X55G
Self-drilling screw with neoprene washer. 5.5 x 55mm.
Material: BZP Steel.
Net weight: 0.006kg.
SEALING STRIP – TA-SEAL
15m roll of sealing strip.
Material: BZP Steel.
Net weight: 1kg.
STANDING SEAM CLAMPS – KCFP1
These are used in conjunction with the 62-5 or 70-5 fittings to connect the Kee Cover to the roof structure.
Material: Galvanised steel to BS EN ISO 1461.
Net weight: 1kg.
To learn more about Kee Cover and how to correctly install it, please download Kee Cover official brochure.
